Juicer Spare Parts

Juicer Spare Parts in Pakistan

A juicer is one of the most useful appliances in a Pakistani home, especially in summer, but its parts take a lot of strain. Filters clog and wear, cutters lose their edge, jars crack and pushers go missing. You rarely need to replace the whole juicer, because a single new part is often enough to get fresh juice flowing again. Hitshop's Juicer Spare Parts section lets you replace the worn part and keep using the machine you already have.

Browse filters, jars, cutters, couplings, pushers and lids, order online and get delivery across Pakistan. Need blender parts as well? See Blender Spare Parts.

Common Juicer Parts You Can Replace

Filters and Strainer Baskets

The filter separates juice from pulp and does the hardest work in the machine. Its fine holes or mesh clog and wear down with time. If your juicer gives less juice than before, leaves wet pulp or vibrates, a worn or blocked filter is often the reason. Match the filter by its diameter, height and the way it fits onto the base.

Juicer Jars and Bowls

The jar or bowl collects the juice. It can crack or lose its spout over time. When replacing it, check that the shape and size match your juicer model so it sits securely under the outlet.

Cutter Blades

The cutter breaks the fruit or vegetable so the juice can be extracted. A dull cutter makes the machine work harder and leaves more juice in the pulp. If you notice slower juicing or a rougher sound, check the cutter.

Couplings

The coupling connects the motor to the cutter or filter. If the motor runs but nothing spins inside, a worn or cracked coupling is the most likely cause, and replacing it is a simple and low-cost fix.

Pushers and Lids

The pusher guides fruit into the feed tube safely, and the lid keeps juice from splashing out. If either is missing or broken, replace it before using the juicer, because many machines will not run safely without them.

Citrus Cones and Pulp Containers

Citrus juicers use a cone that presses oranges and lemons, while many centrifugal juicers include a pulp container. Choose a replacement made for your model so it fits and works properly.

Signs It Is Time to Replace a Part

• You get less juice than before, and the pulp comes out wet.
• The juicer vibrates or shakes during use.
• The motor runs but the filter or cutter does not turn.
• The jar, lid or spout is cracked or leaking.
• The filter holes are blocked, bent or visibly worn.
• The machine makes a harsh scraping or rattling noise.

How to Choose the Right Juicer Part

1. Find the model number on the label at the bottom or back of the motor base.
2. Note the brand, wattage and juicer type, such as centrifugal, citrus or slow juicer.
3. Compare the old part with the product photos, including diameter, height and the fitting at the bottom.
4. Read the product listing to confirm which models the part is made for.
5. Ask us if you are unsure. Send your model number or a photo of the old part on WhatsApp, and we will help you check before you order.

How to Make Your Juicer Parts Last Longer

• Rinse the filter right after juicing, before the pulp dries and blocks the holes.
• Clean the filter with a soft brush, and avoid hard scrubbing that can bend the mesh.
• Cut fruit and vegetables into pieces that fit the feed tube instead of forcing them in.
• Remove very hard seeds and stones before juicing.
• Do not run the juicer for too long at once, and let the motor rest between batches.
• Dry all parts fully before storing them.

Safety first: unplug the juicer before taking it apart or fitting a new part, and never put your fingers or utensils into the feed tube while the machine is running.

Repair or Replace Your Juicer?

If the motor works well and only a filter, cutter, jar, coupling or pusher has worn out, a spare part is a smart and economical choice. If the motor overheats, smells burnt or does not start at all, get it checked by a technician before spending more. You can also explore our main Kitchen Appliances Spare Parts section.

Frequently Asked Questions

Why is my juicer giving less juice than before?

A blocked or worn filter and a dull cutter are the most common reasons. Clean the filter thoroughly, and if the holes are damaged or the cutter is blunt, replace the part.

How do I know which filter fits my juicer?

Check your juicer's brand and model number, then compare the filter's diameter, height and fitting with the product listing. If you are unsure, send us your model number or a photo of the old filter.

My juicer motor runs but nothing spins. What is wrong?

The coupling is the usual cause. It connects the motor to the cutter or filter, and replacing it normally solves the problem.

Can I use a juicer without the pusher or lid?

It is not safe to do so. Replace a missing pusher or lid before you use the machine again.

Can I use parts from a different brand?

Only if the listing clearly mentions your model. Sizes and fittings differ between brands, and a poor fit can damage the juicer.

Do you deliver across Pakistan with Cash on Delivery?

Yes. Hitshop delivers across Pakistan with Cash on Delivery, and delivery is free on orders above Rs.5,000. For help, call 0347-2900990 (Monday to Saturday, 10am to 10pm) or use the Contact page.